1. Want to see less ads, private areas and be able to post? Register Today to receive all these benefits and more!
Dismiss Notice

Want to see less ads, post content and the ability to buy & sell Oakleys?

Register Today or Login

  1. haha161

    haha161 Oakley Beginner

    Messages:
    8
    Trophy Points:
    3
    dismantle a halfwire for cleaning

    carry out at your own risk

    coz my lenses have deep scratches on it, so i wouldn't mind adding a few more

    not recommended if you intend to collect it,

    can feel the two tiny screws about to strip the head when assembling everything

    again.......



    first undo the two tiny philips screws at the back of the nose bridge,

    after remove the nose bridge clamp


    Dismantle a halfwire v1 for cleaning - image.jpg


    bend the lens a little backward on the nose bridge side,

    you should be able to remove the lens out after the notch has clear the nose bridge

    area,

    Dismantle a halfwire v1 for cleaning - image.jpg

    Dismantle a halfwire v1 for cleaning - image.jpg

    Dismantle a halfwire v1 for cleaning - image.jpg

    after cleaning ,reverse the above and done,
     
    motoGP_fanatic likes this.
    Shade Station Oakley Sunglasses

    Register to Not see this ad