Rustpot
M Frame Lover
I need help! I've got a mess on my hands, and I'd like feedback and suggestions from the forum on methods and idea to improve what I've got.
If you've got similar questions on how to display something, how to organize your junk, or are looking for help on improving the collection makes posts as well!
This is what I'm working with; Two towers flanking a short dresser, and a cube.
Tower 1 is a 16"x16" 4-shelf w/ 4 interior drawers. 6' tall.
Tower 2 is a 16"x12" 6-shelf. 6ft tall.
The Dresser is 39" wide, 21" deep, and 30" tall.
Tower 1;
Top 2 shelves shown below. Top shelf has a 10th mountain and Flying Tiger yellow bag, and an SI sticker card in the back. Current pairs are my 4 Ten (and a loose NewFrog). The Multicam Ten started life as an SI Ten, if that helps.
Here's a better look at shelf 2. "Build Them Yourself" card, 2 lens tier stand (Qtrain custom perfmetal), and somewhere around 15-20 lenses.
Shelf 3 is a mess. I have all of my NewFrogs crammed in there. They're messy, there's too many boxes, trying to get one out to wear results in this catastrophe. I have my Chop Jupiter Camo in there, and I have two name card things (that are proper for this model!). Help needed on this one.
Bottom shelf... Just a few pairs, and a 3D scatter skull. I haven't done anything with this to try and make it look good.
On top of the tower is the cube, set at a 45 so it sits on top. Inside is a Shoe One high in yellow, and there's an SI box, and a hat along for the ride.
Tower 2; This is a dedicated M Frame Tower!
Top shelf - Chop brushed metal, polarized display, and my Gen1/2 vintage frames and lenses.
2nd shelf - my 3 Gen1/2 Slash pairs, and an Oakley Sports Evolution card. And a random frame.
3rd shelf - Heater pairs, and an M Frame nameplate
4th shelf - Strike pairs, 2.0 pop card, and Chop Pro custom
5th shelf - Pro pairs and Pro nameplate.
Bottom shelf - 3 styles of M Frame cases
Dresser;
Nothing organized. Cases, bags, spare parts, etc.
Who's got suggestions!?
If you've got similar questions on how to display something, how to organize your junk, or are looking for help on improving the collection makes posts as well!
This is what I'm working with; Two towers flanking a short dresser, and a cube.
Tower 1 is a 16"x16" 4-shelf w/ 4 interior drawers. 6' tall.
Tower 2 is a 16"x12" 6-shelf. 6ft tall.
The Dresser is 39" wide, 21" deep, and 30" tall.
Tower 1;
Top 2 shelves shown below. Top shelf has a 10th mountain and Flying Tiger yellow bag, and an SI sticker card in the back. Current pairs are my 4 Ten (and a loose NewFrog). The Multicam Ten started life as an SI Ten, if that helps.
Here's a better look at shelf 2. "Build Them Yourself" card, 2 lens tier stand (Qtrain custom perfmetal), and somewhere around 15-20 lenses.
Shelf 3 is a mess. I have all of my NewFrogs crammed in there. They're messy, there's too many boxes, trying to get one out to wear results in this catastrophe. I have my Chop Jupiter Camo in there, and I have two name card things (that are proper for this model!). Help needed on this one.
Bottom shelf... Just a few pairs, and a 3D scatter skull. I haven't done anything with this to try and make it look good.
On top of the tower is the cube, set at a 45 so it sits on top. Inside is a Shoe One high in yellow, and there's an SI box, and a hat along for the ride.
Tower 2; This is a dedicated M Frame Tower!
Top shelf - Chop brushed metal, polarized display, and my Gen1/2 vintage frames and lenses.
2nd shelf - my 3 Gen1/2 Slash pairs, and an Oakley Sports Evolution card. And a random frame.
3rd shelf - Heater pairs, and an M Frame nameplate
4th shelf - Strike pairs, 2.0 pop card, and Chop Pro custom
5th shelf - Pro pairs and Pro nameplate.
Bottom shelf - 3 styles of M Frame cases
Dresser;
Nothing organized. Cases, bags, spare parts, etc.
Who's got suggestions!?