1. Want to see less ads, private areas and be able to post? Register Today to receive all these benefits and more!
Dismiss Notice

Want to see less ads, post content and the ability to buy & sell Oakleys?

Register Today or Login

  1. qtrain23

    qtrain23 3D Printing Protege

    Messages:
    9,160
    Trophy Points:
    2,023
    Rustpot started this project awhile back but never finished it. I picked up the frame he was playing with on Friday and thought I'd give it go. Here's the finished product:

    Halfwolf - Revisited - redudevy.jpg
    Halfwolf - Revisited - ubynuze2.jpg

    Gonna do some more reshaping and see if I can't improve it
     
    OakleyFrankFMJ and OakleyBoss84 like this.
    Shade Station Oakley Sunglasses

    Register to Not see this ad
  2. cornwich

    cornwich Oakley Beginner

    Messages:
    16
    Trophy Points:
    73
    Love that look. Think it is something Oakley should if done.
     
  3. Ecko

    Ecko Team RamRod Staff Member Premium Member

    Messages:
    2,663
    Trophy Points:
    573
    That looks pretty cool. The top corner of the glasses looks a bit off. Maybe to much material for the sleeker look.
     
  4. OakleyGuru379

    OakleyGuru379 What is that thing?!

    Messages:
    7,298
    Trophy Points:
    1,223
    Does the frame seem like it will hold up without the lower part of the orbitals?
     
  5. OBlazer

    OBlazer Oakley Enthusiast

    Messages:
    791
    Trophy Points:
    108
    It's just as thick as a radar or flak, and the lens is held in by the nose piece that is attached, so it should be pretty structurally sound.

    love the look Q!
     
  6. OakleyFrankFMJ

    OakleyFrankFMJ The Legend - - Vlad the Impaler Premium Member Lifetime Member

    Messages:
    26,694
    Trophy Points:
    2,993
    I think that looks pretty good.....not too sure about the model though. :p
     
  7. Lumbergh

    Lumbergh Oakley Enthusiast

    Messages:
    350
    Trophy Points:
    113
    Looks terrible imo.
     
  8. Batwolf

    Batwolf Double Team Premium Member

    Messages:
    6,170
    Trophy Points:
    893
    Looks almost like a knockoff IMO but with some more carving it could look much better.
     
  9. Rustpot

    Rustpot M Frame Lover Premium Member

    Messages:
    8,320
    Trophy Points:
    2,023
    I agree.
     
  10. Beancooker

    Beancooker Oakley Enthusiast

    Messages:
    514
    Trophy Points:
    273
    Too big for my pinhead, but I like the creative thought put into it. I think flattening out or squaring off the bottom of the lens will make it look a lot better.