• Take 30 seconds to register your free account to access deals, post topics, and view exclusive content!

    Register Today

    Join the largest Oakley Forum on the web!

Help - fixing a stuck temple screw

EZ out (misnomer btw) or drill the center of the screw out and remove the outer threaded residue.
Of course be careful not to drill out the threads.
 
I would first soak that area with PB Blaster, it will make your life much easier. I also agree don't try to push it out you will destroy the threads, it's a screw not a nail. To small for all the EZ out, at least all I have seen. First use the PB Blaster and keep soaking it for at least 2 days. It may spin out fairly easy using a jewelers screwdriver set. If all else fails send it to the pros. My son and I fully restored a 1977 CJ5, I am a pro now at removing rusted fasteners!!!!!
 
Does soaking a polished frame does it any decolored?
Will trying a bit more before sending to one of the two experts mentioned by @SiRacer420

Thank you everyone.
 

Latest Posts

Back
Top