1. Want to see less ads, private areas and be able to post? Register Today to receive all these benefits and more!
Dismiss Notice

Want to see less ads, post content and the ability to buy & sell Oakleys?

Register Today or Login

  1. DWMK

    DWMK Oakley Beginner

    Messages:
    7
    Trophy Points:
    53
    I have a buddy that picked up a double wide 3.0 display case recently. I was wondering what material and thickness the shelves are for it and if there is a place that someone recommends to get shelves made. Finally if anyone has suggestions for a paint to touch up the matte black finish please let me know.
     
    Shade Station Oakley Sunglasses

    Register to Not see this ad
  2. Oakley-olic

    Oakley-olic Oakley Expert Premium Member Lifetime Member

    Messages:
    1,683
    Trophy Points:
    523
    The shelves are tempered glass although I dont think they did a good job on the tempered. I had chips in mine that would have shattered good tempered glass. Not sure of the thickness but I remember that they were on odd size. I believe it was in between 3/16 and 1/4 inch. I went with 1/4 and polished edges. Home Depot has the Rustoleum textured black spray paint, its a very close match.
     
  3. Dyeraudio

    Dyeraudio Juliet Enthusiast

    Messages:
    4,156
    Trophy Points:
    693
    I know where a complete set of 4 dbl wide shelves are. Not sure if their shippable because of the weight. Exact replacements I've been quoted $125 EACH because of the divots on each end for door swing. I'll inquire if you're interested and in the USA.
     
  4. DWMK

    DWMK Oakley Beginner

    Messages:
    7
    Trophy Points:
    53
    I'm interested. Not sure if I'll be able to make it work if shipping is not an option but if it's close enough I might be able to make a road trip.
     
  5. Dyeraudio

    Dyeraudio Juliet Enthusiast

    Messages:
    4,156
    Trophy Points:
    693
    PM'd
     
  6. pistolpetefan23

    pistolpetefan23 Oakley Expert Premium Member

    Messages:
    2,157
    Trophy Points:
    743
    I did Rustoleum brush paint on my case. It works OK, but certainly not quite the same. If you paint the whole thing, or do like I did and just paint the base it will work. Spot touch up will be tough though, not sure it'll look good. It's a hair different color, and changes the texture. Plus, the OEM finish has a bit of flake to it.
     
  7. Brenden Serna

    Brenden Serna Oakley Beginner

    Messages:
    10
    Trophy Points:
    83
    I could use some of these shelves as well, in need of the exact same shelves as you
    The measurment I have are from @pricedollaz from Instagram
    31.25x15.25
    Side is 14.25 after cut out and the middle of the from is 25.25 after the cut out and he said his are 1/4 tempered glass, but I talked to a glass guy today and he said that 1/4 tempered would flex too much, but I think that is a bunch of malarkey if you ask me, I've seen displays for tons of different things with 1/4 thick tempered
     
    Oakley dork and pricedollaz like this.
  8. DWMK

    DWMK Oakley Beginner

    Messages:
    7
    Trophy Points:
    53
    I'm still looking for glass too or a good place to cut me some also looking into the idea of thick plexiglass any ideas?
     
  9. Brenden Serna

    Brenden Serna Oakley Beginner

    Messages:
    10
    Trophy Points:
    83
    I am too, the place I talked to is here in Scottsdale, Arizona and wants $40 per shelf which is about what I paid for my cabinet haha
     
  10. OakleyFrankFMJ

    OakleyFrankFMJ The Legend - - Vlad the Impaler Premium Member Lifetime Member

    Messages:
    26,841
    Trophy Points:
    2,993
    I feel that price isn't bad at all