• Take 30 seconds to register your free account to access deals, post topics, and view exclusive content!

    Register Today

    Join the largest Oakley Forum on the web!

Oakley Pit Boss disassemble

So I got a hold of @Gecko
So @TexxxZ Stand by

here is what he said, he has like 8 custom PB1
Ill be trying this eventually probably this winter when things slow down.
Ill keep a posted record with Pics when I disassemble the PB1


"Yep on all 8 of the customs they were removed to paint.
Sometimes they will just twist off but normally you have to push in on the pins and kinda twist. Hard to explain i guess. But they are just pushed onto the omatter part of the frame like radarlocks etc"

Read more: http://www.oakleyforum.com/conversations/pb1-plates.155201/#ixzz3inpbJqPv

Won't allow access to link , but here's a question you may be able to answer .
The torx screw used (I need one) what are the dimensisions I've read it's a T5 but length size i can not find ! .
 
Won't allow access to link , but here's a question you may be able to answer .
The torx screw used (I need one) what are the dimensisions I've read it's a T5 but length size i can not find ! .

I also need one
I have a thread saved that describes the details
let me see if i can find it
 
Thanks to @marc2040 for the details on the screw
here is the one from McMasters , I think it will work
But Im still doing reasearch
96817a799l.gif




Here is what Mark posted


vfsaxr57-jpg.158185.jpg
 
I'm also interested in learning how to take off the plates from the Pitboss I. It would be awesome if someone could show some photos when they are taking off the plates from the PB1 before customizing.
 
Back
Top