1. Want to see less ads, private areas and be able to post? Register Today to receive all these benefits and more!
Dismiss Notice

Want to see less ads, post content and the ability to buy & sell Oakleys?

Register Today or Login

  1. Chris A Hardaway

    Chris A Hardaway The Man Loves to Chop 'Em. Premium Member

    Messages:
    2,142
    Trophy Points:
    743
    'Sup Peeps!?
    Was hoping someone can help me with orientation on OTT OEM Lenses. I see the lenses have a very small bump. I can't tell if that bump should be oriented on the lower side nasally, or on the upper side nasally... I believe it's one or the other. However, if I'm way off base and it goes "temporally" let me know. Thanks guys, I need to do a custom cut on one with only a template as my guide, no OTT frame in hand.
    -RJ aka Chris
     
    Shade Station Oakley Sunglasses

    Register to Not see this ad
  2. jdd32

    jdd32 X Metal Workshop

    Messages:
    1,442
    Trophy Points:
    723
    They're top corners like Mars iirc.
     
  3. SiRacer420

    SiRacer420 I've got a few Oakleys

    Messages:
    3,091
    Trophy Points:
    693
    Never had the balls to take mine out. I'd be curious to know as well.
     
    VolcanOG likes this.
  4. supersharp

    supersharp X-Metal Connoisseur Premium Member

    Messages:
    4,093
    Trophy Points:
    773
    I've never owned a pair. Do they just pop out?
     
  5. CarGuy

    CarGuy Oakley Expert Premium Member Lifetime Member

    Messages:
    4,454
    Trophy Points:
    723
    Yup, just like any other o matter.
     
    supersharp likes this.
  6. zwc0442

    zwc0442 Oakley Expert Premium Member

    Messages:
    630
    Trophy Points:
    593
    The pair I had the lens had no bump on the lenses at all.
     
  7. Chris A Hardaway

    Chris A Hardaway The Man Loves to Chop 'Em. Premium Member

    Messages:
    2,142
    Trophy Points:
    743
    Just cut a custom set for @Dnkeyhnter
    His lenses had the bump on the lower, nasal (inner) side... Hmmm. Made him a set of violet iridium lenses with big taco donors. Donors are slightly too small. Right lens ended up with small flat spot on bottom, left lens I was able to "round it out" better.
    I'm going to call this job a success, but I'm really not interested in doing more. Sorry guys!
    Anyone know of a larger donor?!
     
  8. #1 Stunna!

    #1 Stunna! Oakley Expert Premium Member

    Messages:
    2,079
    Trophy Points:
    773
    Whew! Lucky me :D
     
  9. Kuztomized

    Kuztomized Oakley Collector

    Messages:
    660
    Trophy Points:
    343
    The spreadsheet over in the DIY section (cutting lenses - what works) says that Plaintiff and Plaintiff Squared also work. I posted some measurements for the Plaintiff lenses for another member who wanted to know if they would work for OTT but I never heard his results.
     
    Sun & Sand and Chris A Hardaway like this.
  10. Kuztomized

    Kuztomized Oakley Collector

    Messages:
    660
    Trophy Points:
    343
    @rzurzel what did you find out when comparing your OTT lenses to the Plaintiff lens measurements?
     
    Chris A Hardaway likes this.