Crankcase chronograph

[Greg00gts]

Help zeroing All chronograph dials on the crankcase.
ive tried the instructions many times already but seems to fail every time.

this is what I’ve been doing
pull crown out to b position (check by moving the crown and observing minute hand move)
hold button a and b for over 2 secs
push button A (this will just start the chronograph)

any ideas
thanks.

 

[SharkSugender]

Do you think the minute machine chrono instructions on youtube would work for your model? Maybe you could try it

 

[Greg00gts]

Just tried it. No luck.

 

[Brit@KSA]

this is what I’ve been doing
1. pull crown out to b position (check by moving the crown and observing minute hand move)
2. hold button a and b for over 2 secs (wait for the Chrono SECONDS HAND to rotate)
3. push button A multiple times, continiously (this will adjust the Chrono seconds hand. Keep pushing until the seconds hand is zeroed. Push like clicking, NOT HOLD DOWN).

4. Push Button B (one click) to proceed to the next subdial then Push(clicking) again on Button A to move and zero the subdial hand.

5. Then repeat step 4 to move onto the next subdial.

https://www.oakley.com/_ui/downloads/watches/oakley-crankcase-watch-manual.pdf

This should help you.... Instructions by @Jorzaky

 

[Greg00gts]

Thanks I tried the steps and watch the video. It seems like in step 2 the chronograph second hand will not rotate.

 

[Brit@KSA]

Thanks I tried the steps and watch the video. It seems like in step 2 the chronograph second hand will not rotate.

Either its broken or you need a new Battery. Change the battery first.