Flex Coupler problems..

[redlinealley]

I purchased a set a nose flex couplers from OXM for my X Square. Having trouble installing them, as they appear to be extremely tight. Any suggestions for installing them?

I purchased a set of flex couplers from l
Linegear for my Juliet's and didn't have any problems installing them.

 

[ShortChangeHero]

That's typically what you want is a tight feel. Try some lube to get them in. Soap or hand sanitizer might help.

 

[redlinealley]

That's typically what you want is a tight feel. Try some lube to get them in. Soap or hand sanitizer might help.

Thanks, I'll lube them up

 

[OakleyFrankFMJ]

That's typically what you want is a tight feel. Try some lube to get them in. Soap or hand sanitizer might help.

 

[redlinealley]

Thanks, I'll lube them up

I just watch a video on installing them. You have to trim the end of the flex coupler while it's in the nose bridge for a perfect fit.

 

[SiRacer420]

I've used everything available. Trust me, OXMs are the best. Purel.

 

[ShortChangeHero]

Then you say "shhhhhhh it will be over soon".

 

[OakleyFrankFMJ]

Then you say "shhhhhhh it will be over soon".

 

[joecool862]

I had the same issue. If you compare the OEM rubber in the xs nosebridge with the OXM rubber you will see that not only is the OXM rubber thicker but longer as well. You have to trim the end to get a good fit. Love their products!

 

[THE X-MAN]

Insert the rubber into the bridge and trim with a sharp #11 ex-acto blade using the nosebridge as a guide.