Oakster I am Jim Jannard... Premium Member Lifetime Member 3,441 2,073 Canada 6/22/14 #1 Hey Guys, I recently acquired a premium tower. The lights do not work. Are there common problems with these (wiring, transformer, etc)?? Thanks for your help!
Hey Guys, I recently acquired a premium tower. The lights do not work. Are there common problems with these (wiring, transformer, etc)?? Thanks for your help!
reggavegga I am Jim Jannard... Premium Member Lifetime Member 4,811 2,273 Cincinnati, Ohio 6/22/14 #2 Did you plug it up? lol just kidding. Give more info maybe pics of the tower.
Oakster I am Jim Jannard... Premium Member Lifetime Member 3,441 2,073 Canada 6/22/14 #5 Fingers crossed someone on here knows about them as I don't want to replace the transformer unnecessarily.
Fingers crossed someone on here knows about them as I don't want to replace the transformer unnecessarily.
the_owl hard to kidnap 8,511 4,173 U.S. 6/22/14 #7 first thing I would do is check voltage on the wires going out. 12v I assume, 110v in the incoming.
the_owl hard to kidnap 8,511 4,173 U.S. 6/23/14 #9 Do you have a test light? If not I would buy a transformer off ebay for like $20
OakleyCan Oakley Expert 1,324 923 Canada 6/23/14 #10 Does this run halogens? Is there a ballast? I know the 3.0 cases have ballasts that are prone to fail.
Does this run halogens? Is there a ballast? I know the 3.0 cases have ballasts that are prone to fail.