• Take 30 seconds to register your free account to access deals, post topics, and view exclusive content!

    Register Today

    Join the largest Oakley Forum on the web!

How To Fix Oakley Display Case LED Lights Guide

JayMann

Oakley Expert
1,703
823
Luton UK
So seen as though i've fitted these ikea LED lights to my case and have had so many of you ask how to fit these i thought i may as well do i little how to guid to help you rest of you guys out.

So first you'll need to get yourself a set of these light... http://www.ikea.com/us/en/catalog/products/20119418/

The kit will look something like this (sorry i had to take mine apart as i had already fitted it)


A0B11DF3-E9DD-4379-8558-91501B0C691E-3814-000002262042F412_zps8e4fbeff-1_zpscd41e31f.jpg


1. Power pack
2. 4 LED lights
3. 2 corner connecters (these are to help fill the gap in the case as the 4 LED light aren't quite big enough to fill the case top to bottom but will do with these connecters)
4. Lead from the power pack to the LED lights (although you get 4 of these lead you don't need them)

This is what your lights need to look like

2F58B09C-9AAB-4B6D-BC92-7AA5115A9438-3814-000002263228B289_zpsaecf92b7.jpg


You'll need to have them looking like this in the case but no need to fit them this way right now ( pic just for demonstration)

Here you can see i've fitted 1 of the lights and 1 of the connecters.

3A10B7A9-1418-4043-AE07-7A92CACC96E4-3814-0000022655B362C5_zps6a9aa78e.jpg


To fit the first light you'll need to fit it from the bottom shelf going in at a angle and sliding it in to place. It is a little tight but they'll be fine.

Then on to the second light (as you can see in the above pic I have already got the second light waiting to go in to place) going in on the second shelf this time and connecting the second light to the first light with the already connected corner connecter.

Now your first and second lights should look something like this...

DCF980DE-E580-4645-9C6D-C20C1298F38F-3814-000002266B5C4948_zps971eb2c3.jpg


Now you'll just have to do them same with the second and third light and using the remanning corner connecter.

AADB3C64-AC0E-47A5-8A01-6F930B7A6B1A-3814-000002267650429B_zps98066395.jpg


On the remanning 4th light all you'll need to do is slot it directly in to 3ed light.

Once you have all the lights connected inside the case its time to get the lead (no.3 on the first pic) from the power pack. I found it easiest to just to push the plastic cover on top of the case up a little and side the cable in to the case.

FD563240-B0A5-4EFE-826D-582EA7BD2331-3814-00000226861D52F0_zps22b5dcee.jpg


Give the cable one final tug from the top of the case pulling any slack back through so you see as little cable as possible


F5A2247D-F0C8-4274-B71E-9FC11FDFFA9C-3814-0000022949AA9475_zps0cb220f0.jpg


There you have it Ikea LED light's kit fitted to your case no holes no messing just 10 mins of your time!

I hope this helps!

Jay
 
Back
Top