• Take 30 seconds to register your free account to access deals, post topics, and view exclusive content!

    Register Today

    Join the largest Oakley Forum on the web!

Jawbone Icon Replacement

Any 3M tape?

The only tape I've seen is a real thick foamy stuff ... :s

Here ya go....

ajy3ysyq.jpg
 
ohhhh.... And get yourself an x-acto knife. Wash your hands good, so that the oils don't inhibit the use of the tape. Tear off a piece about 2 inches, stick the icon in the middle of the tape press it into the tape for good adhesion. Cut out the center with your x-acto knife. Then trim off the excess around the outside. Should take you a minute or so...... Then press the icon back into the stem.
 
ohhhh.... And get yourself an x-acto knife. Wash your hands good, so that the oils don't inhibit the use of the tape. Tear off a piece about 2 inches, stick the icon in the middle of the tape press it into the tape for good adhesion. Cut out the center with your x-acto knife. Then trim off the excess around the outside. Should take you a minute or so...... Then press the icon back into the stem.

Dude that's an awesome guide, thanks!

Now I gotta find the tape and close the deal with Marc2040...
 

Latest Posts

Back
Top