Minute Machine Chronograph not resetting

[alol]

As per Title, Chrono Second hand is not resetting to 12 o'clock. Watch is still keeping Time OK though.

Able to reset hands through the normal procedure.

Is this Battery or Movement related?

TIA

 

[XxRuMKaxX]

@zwc0442

 

[zwc0442]

As per Title, Chrono Second hand is not resetting to 12 o'clock. Watch is still keeping Time OK though.

Able to reset hands through the normal procedure.

Is this Battery or Movement related?

TIA

Does it reset to the wrong position or doesn't move at all?

 

[alol]

Resets to the wrong position.

 

[zwc0442]

Pull the crown out to the set time position, press both and hold both chrono buttons. The main hand will make one revolution. When it stops release both buttons, then press the top one to advance the hand 1 second for every press. When it's at 12 push the crown back in and it's set.

 

[alol]

I've done that Fella. It will allow me to reset the Hands (main Second hand & Sub dials) but when I try it again a few days later it is stopping at the 8 o'clock position

 

[zwc0442]

So when you manually reset the stop position for the large second hand to the 12 o'clock and save it, it will just randomly stop at the 8 position after a couple of days?

 

[alol]

Yes Fella. I have a spare Battery, Just seeing if I have the applicable screwdrivers for the Back/battery holder.

 

[Ironranger88]

Owners manual is available for free online. Good to read up on the watches you own! Some of them get a tad complex and frustrating if you don't set them up right

 

[alol]

Sent MM away to my usual Source (along with one of my TB for latest Capacitor)

Battery Change was all that was needed. It's working a Peach now.