Minute machine sizing

[John. Walker]

any members know anybody that deals in Oakley watches. Who add links or makes them smaller. I'm in Toronto. Ontario john

 

[OakleyFrankFMJ]

any members know anybody that deals in Oakley watches. Who add links or makes them smaller. I'm in Toronto. Ontario john

All you need is an Allen key to size a MM to remove links

 

[John. Walker]

Do u know what size thanks

 

[OakleyFrankFMJ]

Do u know what size thanks

Not sure. It's very small.

I tried a few till I found the right one

 

[Oakley-olic]

any members know anybody that deals in Oakley watches. Who add links or makes them smaller. I'm in Toronto. Ontario john

On a Minute Machine or Hollow Point. To add or remove links use a 2.5mm Allen/Hex key. Do not use a ball end or a worn allen and make sure it is fully inserted. If adding, when installing the black washer the dimples go towards the inside. Use blue loctite or check them often. Do not over torque, they can break and your screwed. To micro adjust you would need a watch pin or other small pin to push in the hole to release the springs pins. Any watch or jewelery store should be able to assist with the pins. I only trust myself or Mike at HQ to touch my watches.

 

[John. Walker]

Thank you so much

 

[CarGuy]

I only trust myself or Mike at HQ to touch my watches.

Big Mike = Da Bomb