Here is my costless collection, financed purchasing and selling around 50 pairs in the last years including 2 Pit Boss, 10 x-metal, 3 plates, 1 moon etc...
How many European collectors are in the forum? Which is my position within this list?
Near the end I suppose
Anyhow, higher floor, the “Stars’ Floor”:
2 XX
Mars
Romeo 2
2 Penny
On the floor: Juliet Initial Run and Juliet 2nd gen with interesting patina
What I really miss is a Romeo. As a matter of fact 3 pieces part of my so called “Juliet’s Floor” are on the market to allow me this purchase:
All 1st Gen except the carbon which is not serialized.
In the last floor I have a Wiretap (1st Oakley purchased) and some plastic frames:
I hope you like it a little...
January 15th, 2019 update
Let’s welcome this new guy. Cheap purchase due to conditions but after 2 hours spent dismounting and cleaning the frame is perfect!! I have purchased new and OEM rubbers (waiting for delivery) while lenses are deeply used (spider cracks and numerous superficial signs) I will keep them for display but I don’t know what is better to purchase. OEM are too expensive but I am thinking about. Or LINEGEAR... or CHEAP THINGS which are engraved X METAL...
January 29th, 2019 update
Romeo 1 restoration completed:
full and careful cleaning, new rubbers, new washers, lenses OEM no custom cut, Fire Iridium used but still good except a small spider crack in one of them which I decided to accept in order to limit the overall cost.
How many European collectors are in the forum? Which is my position within this list?
Near the end I suppose
Anyhow, higher floor, the “Stars’ Floor”:
2 XX
Mars
Romeo 2
2 Penny
On the floor: Juliet Initial Run and Juliet 2nd gen with interesting patina
What I really miss is a Romeo. As a matter of fact 3 pieces part of my so called “Juliet’s Floor” are on the market to allow me this purchase:
All 1st Gen except the carbon which is not serialized.
In the last floor I have a Wiretap (1st Oakley purchased) and some plastic frames:
I hope you like it a little...
January 15th, 2019 update
Let’s welcome this new guy. Cheap purchase due to conditions but after 2 hours spent dismounting and cleaning the frame is perfect!! I have purchased new and OEM rubbers (waiting for delivery) while lenses are deeply used (spider cracks and numerous superficial signs) I will keep them for display but I don’t know what is better to purchase. OEM are too expensive but I am thinking about. Or LINEGEAR... or CHEAP THINGS which are engraved X METAL...
January 29th, 2019 update
Romeo 1 restoration completed:
full and careful cleaning, new rubbers, new washers, lenses OEM no custom cut, Fire Iridium used but still good except a small spider crack in one of them which I decided to accept in order to limit the overall cost.
Last edited:
