OakleyFreak

I put the G in GMoney
2,770
693
EveryWhere
100_0020.JPG
100_0019.JPG
100_0021.JPG
100_0022.JPG
Took apart PB2 Rootbeer for Hydro Dipping
Need a T5 for orbital Screws
Small Philips fro Plate screws
The side plates screw is located under the Icon
Icon pulled off with fingernail. (Glued on)
The ear stem plates had a small amount of glue residue.I just pushed them down at the rear of the plate to get the off
The orbital plates had no glue and came off very easy
Ear stem rubbers pull down from the front then back and over the end
Nose bombs come off by pulling straight up with lens out
Overall real simple to tear down. I only hope the PB1 will be when I get to it.
 

Shade Station Oakley Sunglasses
Register to Not see this ad

TexxxZ

Let’s hug it out buddy 😡
2,913
743
Eire
View attachment 192239 View attachment 192240 View attachment 192241 View attachment 192242 Took apart PB2 Rootbeer for Hydro Dipping
Need a T5 for orbital Screws
Small Philips fro Plate screws
The side plates screw is located under the Icon
Icon pulled off with fingernail. (Glued on)
The ear stem plates had a small amount of glue residue.I just pushed them down at the rear of the plate to get the off
The orbital plates had no glue and came off very easy
Ear stem rubbers pull down from the front then back and over the end
Nose bombs come off by pulling straight up with lens out
Overall real simple to tear down. I only hope the PB1 will be when I get to it.
Yeah here's one i played with ..
Ps those screws are f**ing tiny
image.jpg
image.jpg
image.jpg
 

TexxxZ

Let’s hug it out buddy 😡
2,913
743
Eire
And no i ain't brave enough to strip a PB1 , PB2 New costs £140-160 PB 1 beater costs a lot more
 

OakleyFreak

I put the G in GMoney
2,770
693
EveryWhere
Looks like a crime scene. :twitch:

Glad you managed to get that done safely and without injuring the PB2 while stripping it naked. :p
Yep
No damage.
Ill post completed after they are dipped

Yeah here's one i played with ..
Ps those screws are f**ing tiny
View attachment 192245View attachment 192246View attachment 192247
Yea
Fn Screw got kicked out on my desk from one orbital plate. I didnt think I was gonna find it. But got lucky
Ill be tackling the Big Bad PB1 this winter
Maybe sooner if the Dip turns out as nice as I think it will
 

TexxxZ

Let’s hug it out buddy 😡
2,913
743
Eire
Have you tried hydro dipping before .... I have 4 times guess how many times i had to strip it off and redo ?

4 times !.
Hope you have better luck than i did.
 

OakleyFreak

I put the G in GMoney
2,770
693
EveryWhere
HAHA No Im sending them for dipping, let the pros do it
I will let my son shoot paint if I go that way on the PB1
Not sure yet
 

OakleyFreak

I put the G in GMoney
2,770
693
EveryWhere
I have been told the plates just push out with some wiggling
That will be my next mod
Thought I would do the easy PB2 first :);)

Did you remove the Icon? Or just pull the plate with the Icon attached?
 

jdd32

X Metal Workshop
1,766
723
Sydney
lol oops - didn't realize i uploaded the wrong pic - my crappy screen skewed the colors and thought i loaded the swaps - that previous pic was OEM rootbeer colorway. Here are the proper swaps. The black/tungsten plate has custom earsocks i was trying out:

DSC_5549.jpg
DSC_5550.jpg
 

New Threads

Top