• Take 30 seconds to register your free account to access deals, post topics, and view exclusive content!

    Register Today

    Join the largest Oakley Forum on the web!

Pit Boss 2 Disassembled

OakleyFreak

I put the G in GMoney
3,339
1,993
EveryWhere
100_0020.JPG
100_0019.JPG
100_0021.JPG
100_0022.JPG
Took apart PB2 Rootbeer for Hydro Dipping
Need a T5 for orbital Screws
Small Philips fro Plate screws
The side plates screw is located under the Icon
Icon pulled off with fingernail. (Glued on)
The ear stem plates had a small amount of glue residue.I just pushed them down at the rear of the plate to get the off
The orbital plates had no glue and came off very easy
Ear stem rubbers pull down from the front then back and over the end
Nose bombs come off by pulling straight up with lens out
Overall real simple to tear down. I only hope the PB1 will be when I get to it.
 
View attachment 192239 View attachment 192240 View attachment 192241 View attachment 192242 Took apart PB2 Rootbeer for Hydro Dipping
Need a T5 for orbital Screws
Small Philips fro Plate screws
The side plates screw is located under the Icon
Icon pulled off with fingernail. (Glued on)
The ear stem plates had a small amount of glue residue.I just pushed them down at the rear of the plate to get the off
The orbital plates had no glue and came off very easy
Ear stem rubbers pull down from the front then back and over the end
Nose bombs come off by pulling straight up with lens out
Overall real simple to tear down. I only hope the PB1 will be when I get to it.

Yeah here's one i played with ..
Ps those screws are f**ing tiny
image.jpg
image.jpg
image.jpg
 
Looks like a crime scene. :twitch:

Glad you managed to get that done safely and without injuring the PB2 while stripping it naked. :p

Yep
No damage.
Ill post completed after they are dipped

Yeah here's one i played with ..
Ps those screws are f**ing tiny
View attachment 192245View attachment 192246View attachment 192247

Yea
Fn Screw got kicked out on my desk from one orbital plate. I didnt think I was gonna find it. But got lucky
Ill be tackling the Big Bad PB1 this winter
Maybe sooner if the Dip turns out as nice as I think it will
 
Have you tried hydro dipping before .... I have 4 times guess how many times i had to strip it off and redo ?

4 times !.
Hope you have better luck than i did.
 
I have been told the plates just push out with some wiggling
That will be my next mod
Thought I would do the easy PB2 first :);)

Did you remove the Icon? Or just pull the plate with the Icon attached?
 
lol oops - didn't realize i uploaded the wrong pic - my crappy screen skewed the colors and thought i loaded the swaps - that previous pic was OEM rootbeer colorway. Here are the proper swaps. The black/tungsten plate has custom earsocks i was trying out:

DSC_5549.jpg
DSC_5550.jpg
 
Back
Top