• Take 30 seconds to register your free account to access deals, post topics, and view exclusive content!

    Register Today

    Join the largest Oakley Forum on the web!

Idontknowsky

Oakley Beginner
1
53
I recently bought this m frames and I was wandering about them that these lenses will fit. They seem to be some of the earlier models that don’t have the clip that goes though the top of the Lens. The are still 2.0 m frames maybe the current m frames lenses will work ??? Help !!!!

357824A8-9DBF-40B1-9D71-CB2C91E1E08C.png

357824A8-9DBF-40B1-9D71-CB2C91E1E08C.png


33339380-95FF-42C6-BF97-C7FC46E62D10.png


FA2FFD51-87CA-43DA-9B93-9F576DCCE333.png


image.jpg


image.jpg
 
I don't own a si 2.0 but I have seen and heard the lens are backwards compatible. I don't believe the M2 will fit into the SI M 2.0 I have not tried though. When I get a chance I'll try to do a few lens swaps in my SI M frame 3.0 and will let you know what I find.

@neill is also very knowledgeable with M Frames!
 
New M Frame, M Frame 2.0 and M Frame 3.0 will all fit the same lenses. The exception will be some of the older 1st Gen lenses. The tips are slightly smaller and will fit loose. If you use an M Frame lens without the hole in a 2.0 or 3.0 Frame, then you obviously will not be able to use the clip that helps hold the lens in place in the event of impact. But you can still use them.

M2 Frame lenses will not fit unless you modify them.
 
Back
Top