S Sushobhon I should Work at Oakley 979 1,093 2/11/19 #1 How to remove the arms of the Jawbreaker? Is there any way to do that? I want to do some custom.
S Sushobhon I should Work at Oakley 979 1,093 2/11/19 #3 "TRUMP" said: You have to lube them up with petroleum jelly first Click to expand... What???
T "TRUMP" Guest 2/11/19 #4 Put petroleum jelly on the hinges. Smoosh it in real good and it will pop right off
WavecloudCustoms Wavecloud Customs dot com 5,808 3,793 Oxford UK 2/12/19 #6 I just pop them out with a bit of force.. The hinge bit is tiny but comes out easy enough
WavecloudCustoms Wavecloud Customs dot com 5,808 3,793 Oxford UK 2/12/19 #7 Oops - my bad.. It’s the Jaw that pops out.
WavecloudCustoms Wavecloud Customs dot com 5,808 3,793 Oxford UK 2/12/19 #8 There’s a tiny hinge pin that you can access once the jaw is removed. That pin can be carefully push through from the jaw side. I use a fine engineers type scriber
There’s a tiny hinge pin that you can access once the jaw is removed. That pin can be carefully push through from the jaw side. I use a fine engineers type scriber