• Take 30 seconds to register your free account to access deals, post topics, and view exclusive content!

    Register Today

    Join the largest Oakley Forum on the web!

Torque Specs

David67

Oakley Beginner
4
53
I recently picked up a nice Wiha 5-10 in-lbs driver. Does anyone know the specs for the screws in the links on a hollow point? It would be nice knowing they’re all to factory spec. Thanks in advance

E06E1DAC-4ED9-4853-AF0F-B2CE855E2F6F.jpeg
 

Shade Station Oakley Sunglasses
Register to Not see this ad

SecretNinja

Oakley Hunter
3,750
693
Krypton
This is valuable info to know. When I bought my MM from an Oakley Store, they insisted on sizing it for me and stripped a screw, without me knowing.
 

Jorzaky

Oakley Enthusiast
96
143
Australia
All the screws have loctite on the threads from the factory, so if you put forward (clockwise direction) force on the thread it may cracks the loctite then the screw may come loose over time. I only check the screws in an anti clockwise direction. If they are loose I then re-loctite them in with a small amount of tension.
Note: The loctite must only be applied to the thread of the screw and the inside thread of the tube.

16186653105543843974335114279157.jpg
 

New Threads

Top