Torque Specs

[David67]

I recently picked up a nice Wiha 5-10 in-lbs driver. Does anyone know the specs for the screws in the links on a hollow point? It would be nice knowing they’re all to factory spec. Thanks in advance

 

[SecretNinja]

This is valuable info to know. When I bought my MM from an Oakley Store, they insisted on sizing it for me and stripped a screw, without me knowing.

 

[Jorzaky]

All the screws have loctite on the threads from the factory, so if you put forward (clockwise direction) force on the thread it may cracks the loctite then the screw may come loose over time. I only check the screws in an anti clockwise direction. If they are loose I then re-loctite them in with a small amount of tension.
Note: The loctite must only be applied to the thread of the screw and the inside thread of the tube.