1. Want to view this complete exchange listing and contact the seller before its too late? Become a Premium Member Today for instant access! Don't miss out!
    Dismiss Notice
  2. Want to see less ads, private areas and be able to post? Register Today to receive all these benefits and more!
Dismiss Notice

Want to see less ads, post content and the ability to buy & sell Oakleys?

Register Today or Login

Want to view this complete exchange listing and contact the seller before its too late? Become a Premium Member Today for instant access! Don't miss out!

  1. Anonymous

    Anonymous Juliet Enthusiast

    10 kits available

    Offering new, unopened LED retrofit light kits for the halogen 3.0 towers. These kits WILL NOT work with the 3.1 w/light panel. Lights are 3W MR16 bulbs. $25 shipped. PayPal G&S.....CONUS Only.

    *The output on your ballast MUST be 12V for these to work. If not you'll smoke them!
    Please check before buying!!!!!!


    WTS: Oakley 3.0 LED Retrofit Kits - ImageUploadedByTapatalk1464740332.371496.jpg

    WTS: Oakley 3.0 LED Retrofit Kits - ImageUploadedByTapatalk1464740586.950929.jpg

    WTS: Oakley 3.0 LED Retrofit Kits - ImageUploadedByTapatalk1464740598.103859.jpg

    WTS: Oakley 3.0 LED Retrofit Kits - ImageUploadedByTapatalk1464740354.864442.jpg

    WTS: Oakley 3.0 LED Retrofit Kits - ImageUploadedByTapatalk1464740363.851121.jpg

    WTS: Oakley 3.0 LED Retrofit Kits - ImageUploadedByTapatalk1464740372.473674.jpg
     
    Last edited by a moderator: 6/2/16
    Shade Station Oakley Sunglasses

    Register to Not see this ad
  2. Anonymous

    Anonymous Guest

    What is contained in each kit? Just 4 LED bulbs? And the LED's burn cooler than the halogen, is that the big advantage? Thanks.
     
  3. Anonymous

    Anonymous Juliet Enthusiast

    Yea....4 bulbs in each kit. None of the intense heat from halogens and last a looooooong time. Much more bright "white" light other than the "yellow" from halogens.
     
  4. Anonymous

    Anonymous Juliet Enthusiast

    1 kit SPF
     
  5. Anonymous

    Anonymous Juliet Enthusiast

    1 kit sold ....9 left
     
  6. Anonymous

    Anonymous Guest

    What needs to be done to run these lights a 3.0 Mega Tower that has halogens currently?
     
    Last edited by a moderator: 7/14/16
  7. Anonymous

    Anonymous Juliet Enthusiast

    Make sure your output voltage is 12V on your ballast. It may be marked depending on what ballast you have.