Well, it's been a while since I did a raffle, and today is as good as any, so here we are again!
Up for raffle is a 3d printed threaded modular canister designed to hold earsocks and nosebombs. I have a few prototypes left over after I made some minor changes to the threading so I decided to raffle them off.
You can stack them however you want, you don't need to use both parts as the lid fits on either base. I plan on designing a bottom earsock section and a middle nosebomb section as well so you can stack it as high as you desire.
This was designed and printed by myself. It's roughly 4.5" tall and 4" wide and can hold A LOT of rubbers. Last picture shows how many earsocks I was able to get into the earsock wells (roughly 42 New Zero socks), however, the total amount of earsocks that fit will vary based on the thickness of the earsocks you want to store. The earsock wells are 3" deep and the nosebomb wells are also quite deep, coming in at 1.25"
It will be completely free to the winner. I will even pay for shipping within the CONUS. If you live outside the CONUS, I will cover up to $5 of the shipping cost.
Pick a number and after all 31 slots are filled, I will raffle it off to the winning number. To be fair, you are only able to pick a number for yourself, so no vouching for another member. I have no issue if you tag them and they come here to claim a number though.
Any questions, feel free to PM me or you can just ask in this thread as well.
Thanks and good luck!
1. @Duuvaalll
2. @O Bro
3. @Oakley Dokely
4. @mickeyblackeyes
5. @sratt17
6. @Marstain
7. @Atticus
8. @Spc369
9. @Beardo0628
10. @kevonai
11. @Lars
12. @Broccoli
13. @Batman_1939
14. @Funky-Trixtar
15. @BradyGod1569
16. @Chattabox23
17. @Inkkoonce
18. @Rick58
19. @THEGROUNDPOUNDER99
20. @deadmeat
21. @MatSteelersFan
22. @Tidezealot
23. @TheStig
24. @H2Oakley
25. @Solomon_Denali
26. @ShortChangeHero
27. @reggavegga
28. @Zax
29. @Kallision
30. @naifs
31. @Chet Manley
hi
Up for raffle is a 3d printed threaded modular canister designed to hold earsocks and nosebombs. I have a few prototypes left over after I made some minor changes to the threading so I decided to raffle them off.
You can stack them however you want, you don't need to use both parts as the lid fits on either base. I plan on designing a bottom earsock section and a middle nosebomb section as well so you can stack it as high as you desire.
This was designed and printed by myself. It's roughly 4.5" tall and 4" wide and can hold A LOT of rubbers. Last picture shows how many earsocks I was able to get into the earsock wells (roughly 42 New Zero socks), however, the total amount of earsocks that fit will vary based on the thickness of the earsocks you want to store. The earsock wells are 3" deep and the nosebomb wells are also quite deep, coming in at 1.25"
It will be completely free to the winner. I will even pay for shipping within the CONUS. If you live outside the CONUS, I will cover up to $5 of the shipping cost.
Pick a number and after all 31 slots are filled, I will raffle it off to the winning number. To be fair, you are only able to pick a number for yourself, so no vouching for another member. I have no issue if you tag them and they come here to claim a number though.
Any questions, feel free to PM me or you can just ask in this thread as well.
Thanks and good luck!
1. @Duuvaalll
2. @O Bro
3. @Oakley Dokely
4. @mickeyblackeyes
5. @sratt17
6. @Marstain
7. @Atticus
8. @Spc369
9. @Beardo0628
10. @kevonai
11. @Lars
12. @Broccoli
13. @Batman_1939
14. @Funky-Trixtar
15. @BradyGod1569
16. @Chattabox23
17. @Inkkoonce
18. @Rick58
19. @THEGROUNDPOUNDER99
20. @deadmeat
21. @MatSteelersFan
22. @Tidezealot
23. @TheStig
24. @H2Oakley
25. @Solomon_Denali
26. @ShortChangeHero
27. @reggavegga
28. @Zax
29. @Kallision
30. @naifs
31. @Chet Manley
Last edited: