IH coin case

[MachineHead]

anyone know where i can buy the same coin case that the IH coins came in? thanks

 

[FearGearGarage]

I've used different ones over the years, just have to get the sizing close (slightly larger obviously).

https://www.amazon.com/Plastic-Capsules-Collection-Adjustable-Two-Cent/dp/B07TXG1VB4/ref=asc_df_B07TXG1VB4/?tag=hyprod-20&linkCode=df0&hvadid=385307455611&hvpos=&hvnetw=g&hvrand=1753867415320475606&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9030021&hvtargid=pla-820166307726&psc=1&tag=&ref=&adgrpid=80256647924&hvpone=&hvptwo=&hvadid=385307455611&hvpos=&hvnetw=g&hvrand=1753867415320475606&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9030021&hvtargid=pla-820166307726

 

[MachineHead]

I've used different ones over the years, just have to get the sizing close (slightly larger obviously).

https://www.amazon.com/Plastic-Capsules-Collection-Adjustable-Two-Cent/dp/B07TXG1VB4/ref=asc_df_B07TXG1VB4/?tag=hyprod-20&linkCode=df0&hvadid=385307455611&hvpos=&hvnetw=g&hvrand=1753867415320475606&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9030021&hvtargid=pla-820166307726&psc=1&tag=&ref=&adgrpid=80256647924&hvpone=&hvptwo=&hvadid=385307455611&hvpos=&hvnetw=g&hvrand=1753867415320475606&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9030021&hvtargid=pla-820166307726

thanks buddy. looks like that holds a 46mm coin. im looking for one that holds a 65mm coin with an insert that holds 45mm coins. so far the closest ive found does hold a 65mm coin but the insert holds a 50mm coin.

(5) Air-tite Y-50mm Black Ring Coin Holder Capsules for 2" Military Challenge Coin https://a.co/d/hpErklt

i wonder if anyone on here can help me make custom inserts

 

[ZCForge]

thanks buddy. looks like that holds a 46mm coin. im looking for one that holds a 65mm coin with an insert that holds 45mm coins. so far the closest ive found does hold a 65mm coin but the insert holds a 50mm coin.

(5) Air-tite Y-50mm Black Ring Coin Holder Capsules for 2" Military Challenge Coin https://a.co/d/hpErklt

i wonder if anyone on here can help me make custom inserts

3d printed inserts, my friend. Pm me if you are looking for custom sizes

 

[MachineHead]

3d printed inserts, my friend. Pm me if you are looking for custom sizes

thanks for the offer but i was thinking more of cutting foam like how the ih coins came

 

[ZCForge]

thanks for the offer but i was thinking more of cutting foam like how the ih coins came

How thick would the foam have to be? I have a die cutter as well

 

[MachineHead]

How thick would the foam have to be? I have a die cutter as well

thats a good question. the original ih coin had 2 foams stacked but a single foam should be fine. based on the capsule specs, it would be 5.49mm thick total.

 

[ZCForge]

thats a good question. the original ih coin had 2 foams stacked but a single foam should be fine. based on the capsule specs, it would be 5.49mm thick total.

That’s too thick for my cutter but I can should be able to cut thinner rings you can stack.

 

[MachineHead]

That’s too thick for my cutter but I can should be able to cut thinner rings you can stack.

sent you a pm buddy