Need help trying to find the size of the rubber o-ring for the back case of my holeshot. I think is measure in milimeters the thickness.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
Thank O brother!!! Appreciate your help!Maybe @shofzr knows?
Thank you O brother! Appreciate your help!Just in case here is the manual for the watch too.
http://www.oakley.com/_ui/downloads/watches/oakley-holeshot-watch-manual.pdf
Thank you O brother!
Thank you O brother!
I think I'll go better ordering a O ring gasket bulk assortment because i am not 100% sure of the thickness.
Thank you for the info! Appreciate your help!What you need is a Silicon Greaser - Watch Gasket O-Ring Lubricator Silicone Grease
A seal 34.0 x 0.8 O-Ring Gasket Refill, -- OR(0.8)340: Star Time Supply
I would order 2 or 3 seals as you will need to give the seal a slight stretch with your fingers to make it fit, do this just before you put the case back on. The silicon from the Greaser will help keep it in place.
May the watch gods be with you. water resistance?