Think I've got a deal, but...

[thatoakleyguy]

Talking with the guy about picking is up for $300.

http://norfolk.craigslist.org/fuo/4544509443.html

Just found out there aren't any shelves. How much and how hard is it to get shelves cut?

 

[Nortika]

300 is not a bad deal at all, but no shelves could be costly.

 

[OOO]

Talking with the guy about picking is up for $300.

http://norfolk.craigslist.org/fuo/4544509443.html

Just found out there aren't any shelves. How much and how hard is it to get shelves cut?

I had some plexiglass custom cut here in Texas. Cost a couple dozen bucks. Not too bad. Shouldn't be that much different in VA.

 

[Brettc10]

Case is a good deal.
It is a double so you will have to get thinker shelves cut. Really depends on the local place you will get it from.

Range could be $10 to $40+ per shelf.
I have a buddy that has a shop and that is what he would charge.
They also have to sand, flame and then polish the edges.

Make sure it has the pins for the shelves.

Good Luck!!

 

[ac7228]

If you have a TAP plastics store nearby, they can do it for you, just make sure you get the same thickness as the acrylic door and not a thinner shelf as it may "sag" under the weight of your collection.