What custom lenses do you have?

[cacatman]

Just saw @NuttyOAK13Y's amazing OO with Torch.

What lenses have you yourself hand cut (/had cut for you) for your Oakleys?

If you've had custom cut lenses done, like a lot of us, you've probably done the X-metals

So far, I've used only 3 manufacturers:-
@Marien lens for a Mars
Big Taco OEM for Juliets and single piece Racing jacket
Dillons for Juliets/Romeo 1/Pit Boss 1

What about you?

 

[docrusty]

That's a cryin' shame those BT's cut for a little ol' Juliet lens!

I've got some Dillon sets but otherwise strictly OEM lenses.

I've used straightlinks for most of my Omatter (EJ's and EJ 2.0, XX Twenty, minute 1.0/2.0, splice, hatchet, NSJ) and they work for most metals too.
SL's even work for whisker (original) cuts and they're great for Half Jacket 1.0 cuts that @Chris A Hardaway does a masterful job on.

I've cut quarter jackets by hand as they will also work for juliets, XX twenty, splice, EJ 2.0, minutes 1.0/2.0.

Recently cut a R2 by hand out of non-pol G8L lenses (it's tight but it all fits!) and yes @Wicked, TWSS lol

 

[cacatman]

That's a cryin' shame those BT's cut for a little ol' Juliet lens!

I know, right? It seemed like a good idea at the time. I came across a stash in Australia and it was all I had to use. I should have kept them for larger frames.

 

[WavecloudCustoms]

i've done an M Frame Heater vr50 Emerald!

 

[TheStig]

@Wavecloud aka Dave ist cutting lenses for me.
I am more than happy with his work.
Here my donor lenses and finish lenses.

These where cut to fit Juliets and XX X-Metal

Quarter Jacket +Red to Juliet
Fast Jacket Fire Iridium to XX X-Metal
Fast Jacket Black Iridium XX X-Metal
Split Jacket Ice Iridium to XX X-Metal
Split Jacket G40 to Juliet
Whisker Bronze to Juliet
Flak Jacket VR28 to Juliet

These are being cut as noted on the bag.
Monster Dog got changed to R2.

Flak Jacket XLJ +Red to Romeo 2
Straightlink Sapphire Iridium to Hatchet
Split Jacket Black Iridium to Romeo 2
Gibston Sapphire Iridium to X-Squared
Half Jacket 2.0XL Black Iridium to Juliet
Turbine Ruby Iridium Pol. to Romeo 1

Here a + Red Custom Cut R2.
Soooo happy.

 

[OakleyOneKenobi]

I'll cut anything as long as it has the right base curve. Just got to give a warning. Never use Plaintiff ice for any cuts. The iridium just peels straight of the lens when removing masking tape. I have used Chrome and they were fine. Just the ice seems to be terrible.

 

[WavecloudCustoms]

Broken free of the paintshop for the afternoon!

Here’s my Prizm Rose XX

Particularly good for flying RC Glider in overcast conditions!

This cut is from a WJ2.0 donor.

 

[jim881]

Broken free of the paintshop for the afternoon!

Here’s my Prizm Rose XX

Particularly good for flying RC Glider in overcast conditions!

This cut is from a WJ2.0 donor.

View attachment 797530

Told you it would be good weather to fly pal

 

[cacatman]

Broken free of the paintshop for the afternoon!

Here’s my Prizm Rose XX

Particularly good for flying RC Glider in overcast conditions!

This cut is from a WJ2.0 donor.

View attachment 797530

Nice. What is the BC? Are they thicker as well?

 

[WavecloudCustoms]

Nice. What is the BC? Are they thicker as well?

It’s a toric shield lens I think.