Display case locks

[merase]

Hello all this is my first post here, I recently was given an Oakley display case for free as it had been sitting unused in a warehouse for a few years. However the keys for the locks were lost so I am unable to close the case door without it swinging inwards and the storage area below is locked and I'm unable to open it without any keys. I'm at a loss for what to do, any suggestions on if there is a way to remove the locks so I can get new ones or?

 

[Msgt Oakley]

Welcome to the forum

 

[Titan X]

go to any hardware store and you can buy replacement locks for less than $10 apiece

 

[Titan X]

if the bottom door is locked and you don’t have a key, it’s easiest just to drill the lockout

 

[merase]

go to any hardware store and you can buy replacement locks for less than $10 apiece

I am unsure how to remove the existing locks

 

[Titan X]

taje the clip off back with screwdriver then take the nuts off of the back of the lock. they will then come out of door

 

[Msgt Oakley]

Like @Titan X said, just drill the lock out. Put the drill bit into the key area and start drilling. It’s not that challenging.