Awesome. So the nose piece for the 2.0 and 3.0 are the same? No modifications @gwertheim ?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
here is a pic of the two different nose pieces. Both are the u-Rx nose piece. The one on the left is the original, the one on the right is modified to work with the original m frame lenses. I use JB Weld to fill in, and sanded it down smooth.
View attachment 794758
The ones the left is the original. It fits the m frame 2.0 and 3.0.
The one on the right has been modified. You should see the mod in the area where the lens goes. It is filled in with JBWeld epoxy. I filled it in and sanded it down until it fit the original m frame lenses.
the two nose pieces are facing each other, so the fitting for the lenses are right next to each other.
I’m sorry, I meant gap around the shield from your face. We discussed that they sit further away because of the bigger nose piece. I was curious how they look on. The work looks fantastic and exactly what’s needed.i was real careful with keeping it tight. and JB Weld is super strong. strongest glue i ever used. tensile strength in the specs is higher than any i have seen. i have worn it on half dozen lenses or more. if it ever fails (which i doubt it will) , i will sand it back down, insert a metal pin, and wrap the glue around that. That is how I repair broken sunglasses, and they have withheld multiple lens inserts.