Romeo 1 Orbital Gasket/Joint Romeo

[Maveryq13]

Does anyone have any issues with the gasket squeezing out of the sides of the orbital joint of the Romeo 1, and does anyone have advice to keep it uniform? I do not over-tighten them; I'll set them to be flush, but through the flex of wearing, the gasket will "bubble out".

Thanks,

Chris

 

[Bone Collector]

It will squeeze out if you are using a non oem lens. I tried the walleva and fuse and they seem to be a tad smaller than the OEM ones so you would end up tightening the screw a bit and in turn flatten the rubber gasket. Try buying the OEM ones for like $80 and you will see the difference.