This one got picked a bit early, so its Not very ripe yet...

[Ironranger88]

That looks excellent. I hope you’re able to find all the parts you need to finish it. If you get shelves, get tempered glass and stay away from plexi/lexan

Why tempered?

 

[ZCForge]

Why tempered?

You don’t have to but it’s stronger and safer if you happen to break it. Also, it’s only a minimal increase in price when I got shelves cut for my aluminum tower. Acrylic will bow/sag over time so stay away from that

 

[ZCForge]

Also, you’re going to have to get measurements of the shelves bc not all 4 corners are cut at a 90 degree angle. There’s a notch cut out of one of the corners to allow the front door to swing open

 

[Ironranger88]

Also, you’re going to have to get measurements of the shelves bc not all 4 corners are cut at a 90 degree angle. There’s a notch cut out of one of the corners to allow the front door to swing open

Oh dang, good thing you said something, cause I already ordered. I'll have to get a hold of em before the cuts are made. Do you have measurements somewhere?

 

[ZCForge]

Oh dang, good thing you said something, cause I already ordered. I'll have to get a hold of em before the cuts are made. Do you have measurements somewhere?

Well your main measurements will prob be fine. You just have to add the notch cut

 

[Ironranger88]

Well your main measurements will prob be fine. You just have to add the notch cut

Well, I can't cut glass.. but I supposed I can cut the door

 

[ZCForge]

Well, I can't cut glass.. but I supposed I can cut the door

You would have to cut a big notch out of the door and then when it’s closed there will be a large hole running up and down the left sidr

 

[Ironranger88]

You would have to cut a big notch out of the door and then when it’s closed there will be a large hole running up and down the left sidr

Hmm.... well once I get the door installed, ill be able to mock it up I guess

 

[Broccoli]

You would have to cut a big notch out of the door and then when it’s closed there will be a large hole running up and down the left sidr

Or you could cut a horizontal notch in the left side of the door for each shelf.

 

[ZCForge]

Or you could cut a horizontal notch in the left side of the door for each shelf.

That would work too I suppose. Don’t leave us, the OF needs you!