iamFLIP
Unretired
- 7,305
- 4,023
Straightlink and Valve, new should both work well.
Flak 2.0/2.0 XL lenses not big enough?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
Straightlink and Valve, new should both work well.
Honestly I don't think so. Flak 2.0 (XL/Std.) donors really aren't good for much except penny. I especially don't like doing them in Polarized, etchings become an issue too.Flak 2.0/2.0 XL lenses not big enough?
He's a she and I believe she will if the donors are suitable, though I can't speak for her. Haven't seen her around here lately so you might want to try contacting through the website I linked earlier. Be aware she's located in the UAE, which isn't really a big deal but can affect shipping times and/or costs.
Also, you will have trouble getting ruby polar and DWP. The problem with polarized is you need a donor big enough to cut without changing the orientation of the polarization, while with non-polar you can cut in any orientation. AFAIK there aren't any suitable ruby polar donors for R2 cuts, but there are for regular ruby - I have a pair, actually. DWP are also polarized and you'll likely have the same problem.
I don't think she's the one who did the prizm snow; was that @jdd32?
Flak 2.0/2.0 XL lenses not big enough?
Honestly I don't think so. Flak 2.0 (XL/Std.) donors really aren't good for much except penny. I especially don't like doing them in Polarized, etchings become an issue too.
Don't do it
...
Doesn't look right to me
Out of curiosity I checked. Splice on top of flak 2.o xl DWP. If it has to be level and centered this will not work. It will fit if you turn it a bit.. thoughts @Chris A Hardaway ??
View attachment 326743
View attachment 326744
Plus one. You can do this if cutting manually. If in machine you will require x number of mm clearanceFor polarized lenses, has to be level and centered. For non-polarized, you can tilt to fit.
I wont reco it, it will have an incorrect polarityFrom the chart I see that holbrook or frogskins work for JFL. Does anybody know if either of these will retain the polarized etching?