1. Want to see less ads, private areas and be able to post? Register Today to receive all these benefits and more!
Dismiss Notice

Want to see less ads, post content and the ability to buy & sell Oakleys?

Register Today or Login

  1. talismanx

    talismanx Oakley Beginner

    Messages:
    171
    Trophy Points:
    98
    Just picked up a pair of original IH lenses for my Juliets (new frame from Oakley - about 2 months old). When I put the lenses in and tighten them all the way I still get a noticeable rattle on both the lenses. Any ideas what I can do about this? Thanks in advance.
     
    Shade Station Oakley Sunglasses

    Register to Not see this ad
  2. pennyhoney

    pennyhoney Oakley Beginner

    Messages:
    291
    Trophy Points:
    93
    remove the lens then put some clear silicone around the inner rim. use a pin or a toothpick to spread the silicon around and apply minimally. Let it dry and cure before putting the lens back
     
  3. PROFESSOR X

    PROFESSOR X Oakley Beginner

    Messages:
    27
    Trophy Points:
    0
    I have that same problem with an X Squared. Thanks for the tip
     
  4. talismanx

    talismanx Oakley Beginner

    Messages:
    171
    Trophy Points:
    98
    Thanks. I moved the lenses in question to a carbon frame where there is little (or no) rattle. But I will definitely be trying this next time I run into this issue.