1. Want to see less ads, private areas and be able to post? Register Today to receive all these benefits and more!
Dismiss Notice

Want to see less ads, post content and the ability to buy & sell Oakleys?

Register Today or Login

  1. THE X-MAN

    THE X-MAN Forum Sponsor Gold Forum Sponsor Premium Member Lifetime Member

    Messages:
    4,402
    Trophy Points:
    723
    The Answer To Your  X-metal Prayers - IMAG0436_zpsfb4074ca.jpg


    This is a pin i thought of using on any x-metal that uses a pressed in rivit.now this one is longer than needed for lets say a juliet but you get the idea.the domed front will fill in the holes left by the extracted rivit making the front of the nosebridge look "factory".so all you would have to do is tap the rear of the nosebridge like the XS does,and now anyone can mix and match parts i.e plasma with x-metal or gold with plasma ect. now we wouldnt do this to a collector grade of shades but a totally customizable x-metal would be unique idea......this is the kinda stuff THE X-MAN thinks about in his sleep.
     
    Shade Station Oakley Sunglasses

    Register to Not see this ad
  2. qtrain23

    qtrain23 3D Printing Protege

    Messages:
    9,161
    Trophy Points:
    2,023
    Is that from an RC car?
     
  3. THE X-MAN

    THE X-MAN Forum Sponsor Gold Forum Sponsor Premium Member Lifetime Member

    Messages:
    4,402
    Trophy Points:
    723
    your good qtrain....traxxas
     
  4. qtrain23

    qtrain23 3D Printing Protege

    Messages:
    9,161
    Trophy Points:
    2,023
    Considering I spend most of my weekends fixing them lol.

    I can probably do better on cost btw if you need quantity.

    I think the threaded portion is too long
     
  5. MaukaRunner

    MaukaRunner Oakley Enthusiast

    Messages:
    544
    Trophy Points:
    108
    Not sure if that can be done. The rear of the nosebridge looks too thin.

    The Answer To Your  X-metal Prayers - ffe37e5d.jpg
     
  6. InfiniteHero

    InfiniteHero Entrepreneur Premium Member

    Messages:
    1,325
    Trophy Points:
    543
    Great Idea at least, hope it works, should start a whole new set of customs and many diff combos especially with your blasts
     
  7. qtrain23

    qtrain23 3D Printing Protege

    Messages:
    9,161
    Trophy Points:
    2,023
    This is what was originally trying to accomplish.

    Those traxxas pins are also hardened so I'm not sure what you're thinking would work.
     
  8. qtrain23

    qtrain23 3D Printing Protege

    Messages:
    9,161
    Trophy Points:
    2,023
    Nice pic. That's one sexy hand.
     
  9. MaukaRunner

    MaukaRunner Oakley Enthusiast

    Messages:
    544
    Trophy Points:
    108
    HEHE, Thanks Q! I borrowed it from the ones you posted on my thread. BTW, the pics were great info. Thanks again.
     
  10. qtrain23

    qtrain23 3D Printing Protege

    Messages:
    9,161
    Trophy Points:
    2,023
    No problem. Here to help