Pospaintballer
I should Work at Oakley
- 716
- 1,673
There's only one white plexi and its on the bottom. The top is clear plexi. I'll have to look it up and get a piece cut for it.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
Unscrew the metal panel on the very top to get into there to see what's up in there.There's only one white plexi and its on the bottom. The top is clear plexi. I'll have to look it up and get a piece cut for it.
The ones at the top take a single 50 cm (roughly) fluorescent tube. To get to it, you need to unscrew about 6 screws from the top grate of the unit.I don't think this one has lights. Or at least there's none in this one.
That would be if it was a 3.0 case. This looks to be a 3.1 case.Congratulations. We are all jealous of your steal!!
The ones at the top take a single 50 cm (roughly) fluorescent tube. To get to it, you need to unscrew about 6 screws from the top grate of the unit.
The down lights inside should have a u shaped pin which when gently squeezed will pop out and release the light bulb downwards.
Sometimes they are missing, but you can "refashion" a large paper clip to do the same job to hold the bulb in its place. Easiest if you have one to "model".
I have no idea how to change the lights at the bottom of the unit.