GamerGuySam
I should Work at Oakley
Albuquerque?What!?
See I can say **** that makes no sense too guys.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
Albuquerque?What!?
Hey buddy. What did you use to make these lenses? Are these the too steep turbine. Or was this like an Asian fit frog lens?
Ok so frog lenses are slightly less wide... but are taller, so can be trimmed slightly top to bottom. But still maybe wiggle side to side? Or just show a tiny gap?Turns out they’re shorter and larger? got the callipers out, hopefully this helps. The new ones appear to be .7mm wider but .3mm shorter, so I feel it’s this extra height on the old ones pushing the bottom of the frame down.
Also as Pumpkin King says, the edges are bevelled too. The Ti lens is the one closer to my fingertips.
View attachment 915354
View attachment 915355
View attachment 915356
View attachment 915357
View attachment 915358
View attachment 915359
View attachment 915360
View attachment 915361
I got the frog lenses so a set should be headed your way for dissection soon.Ok so frog lenses are slightly less wide... but are taller, so can be trimmed slightly top to bottom. But still maybe wiggle side to side? Or just show a tiny gap?
@pjd1234
As i said it aint true. The xeus whichbis for sure 500 pieces has been gone for a long timeAlso I’m still blown away they are showing as available on sgh still. Have all 500 ish pairs not been sold yet?
Than you @Ben G I'm finally cutting my first soon. It looks like the frogskin ti has a shaper v point to the bevel. Does that sound correct?Turns out they’re shorter and larger? got the callipers out, hopefully this helps. The new ones appear to be .7mm wider but .3mm shorter, so I feel it’s this extra height on the old ones pushing the bottom of the frame down.
Also as Pumpkin King says, the edges are bevelled too. The Ti lens is the one closer to my fingertips.
View attachment 915354
View attachment 915355
View attachment 915356
View attachment 915357
View attachment 915358
View attachment 915359
View attachment 915360
View attachment 915361
i slightly trimmed mines on topOk so frog lenses are slightly less wide... but are taller, so can be trimmed slightly top to bottom. But still maybe wiggle side to side? Or just show a tiny gap?
@pjd1234
Than you @Ben G I'm finally cutting my first soon. It looks like the frogskin ti has a shaper v point to the bevel. Does that sound correct?