This one got picked a bit early, so its Not very ripe yet...

[Ironranger88]

Yes you can, I had to get 8 for the same case to add two additional shelves, I also had shelves and a door cut. I have 2 of these single wides in my home office. Let me know if you need shelf dimensions or door dimensions. Best option is if you have a fellow collector near you , see if they would bring the shelf and door to a glass shop and they can take the measurements and cut you an exact Plexi door and tempered glass shelves for it to factory spec.

That would be ideal.
Yes, if you have the dimensions, that would help

 

[AlanH]

That would be ideal.
Yes, if you have the dimensions, that would help

My production door is

43 1/2 inches (H) by 18 1/4 inches (W)
Lock holes for the cam locks (1 7/8 in from the long side by 3/4 inch down from the short). Thats to center of the cam lock for your drill point. Just bring them a cam lock to get the specific size drilled.

Send the shelf later today

 

[Ironranger88]

My production door is

43 1/2 inches (H) by 18 1/4 inches (W)
Lock holes for the cam locks (1 7/8 in from the long side by 3/4 inch down from the short). Thats to center of the cam lock for your drill point. Just bring them a cam lock to get the specific size drilled.

Send the shelf later today

Is there cut outs for the hinges or is the door straight across. How thivk is the door?

 

[Ironranger88]

My production door is

43 1/2 inches (H) by 18 1/4 inches (W)
Lock holes for the cam locks (1 7/8 in from the long side by 3/4 inch down from the short). Thats to center of the cam lock for your drill point. Just bring them a cam lock to get the specific size drilled.

Send the shelf later today

Parts and sizes guide for Mega Tower 3.0

I'll be putting together a few threads for parts and sizes of the 3 towers I have. For now, I'm looking for these measures for the door and shelfs if anyone can help me out

www.oakleyforum.com

 

[AlanH]

Is there cut outs for the hinges or is the door straight across. How thivk is the door?

There are no cutouts for the hinges, it just slides into them and then you tighten down the door brackets. The thickness of the door is 1/4 inch, shelves are the same thickness.

Shelves are 21 3/8 (W) x 14 5/8 (Deep)

 

[Ironranger88]

There are no cutouts for the hinges, it just slides into them and then you tighten down the door brackets. The thickness of the door is 1/4 inch, shelves are the same thickness.

Shelves are 21 3/8 (W) x 14 5/8 (Deep)

where would you say the cut outs in the shelfs are?

 

[AlanH]

where would you say the cut outs in the shelfs are?

My measurements are for the square shelf. If you want the factory shelf they have 2 custom cuts. you would need someone to bring a shelf to a glass shop for you so they can take an exact measurement.

Give you an idea of what I mean. Each side has a unique cut and they are not the same.

 

[AlanH]

I would preface that if a member lived near me I would just bring one of mine to the shop for them to measure up for cuts. I dont see it as a big ask. But thats just my opinion and what I would do to help a collector rebuild a case to spec.

 

[Ironranger88]

My measurements are for the square shelf. If you want the factory shelf they have 2 custom cuts. you would need someone to bring a shelf to a glass shop for you so they can take an exact measurement.

Give you an idea of what I mean. Each side has a unique cut and they are not the same.


View attachment 822996

Oh, I see... Yeah, I don't see needing that extra 1/4 in lip in the front. Going square is probably way cheaper too I bet. THANKS for the info!

 

[Ironranger88]

I would preface that if a member lived near me I would just bring one of mine to the shop for them to measure up for cuts. I dont see it as a big ask. But thats just my opinion and what I would do to help a collector rebuild a case to spec.

For sure. If anyone in Phoenix sees this, let me know! lol otherwise, I'm just going to do squared I suppose.