Arron1980 Oakley Enthusiast 311 153 England 4/27/15 #1 Anybody going to purchase the nose bridge tool off Linegear?
kronin323 Font of Useless Knowledge 46,014 7,943 Austin, TX 4/27/15 #2 There's one guy who got one and used it; his feedback is in this post: Hello from Linegear, X-Metal Professional | Page 19 | Oakley Forum
There's one guy who got one and used it; his feedback is in this post: Hello from Linegear, X-Metal Professional | Page 19 | Oakley Forum
OakleyGuru379 Professional Lens Scratcher Premium Member Lifetime Member 8,719 4,073 Illinois 4/27/15 #3 By doing it yourself, what damage do you risk to your frame? Is it only cosmetic, or worse? I could live with cosmetic on a couple of mine.
By doing it yourself, what damage do you risk to your frame? Is it only cosmetic, or worse? I could live with cosmetic on a couple of mine.
kronin323 Font of Useless Knowledge 46,014 7,943 Austin, TX 4/27/15 #4 Could go either way. If it just slips off and dings the frame, that's most likely just cosmetic. But if the rivet get jacked up and ultimately the rivet hole is enlarged or distorted, worse...
Could go either way. If it just slips off and dings the frame, that's most likely just cosmetic. But if the rivet get jacked up and ultimately the rivet hole is enlarged or distorted, worse...
Arron1980 Oakley Enthusiast 311 153 England 4/27/15 #5 I would only ever do it if your are confident and even then on a frame that you don't mind damaging like a "practice" frame. But even then I would be hesitant.
I would only ever do it if your are confident and even then on a frame that you don't mind damaging like a "practice" frame. But even then I would be hesitant.