BoostBear
°—°
From my research it appears the rip n roll system uses a center screw to put in from the interior side of the lens to be held in place, while the other two holes on each side are to align the rolls evenly. So tracing onto your blue iridium should be doable if you get a RNR w/ some type of lens.
I imagine they may advice against it for liability reason of your ruining your lens, but if you ask this seller if the RNR lenses are different in any way from the oem crowbar blue iridium lens you have aside from the 3 holes on each side. If they implicate the holes are the only difference then you should be fine in retrofitting the RNR to yours by copying the hole placement.
https://www.ebay.com/itm/RipNRoll-Blue-Roll-off-Goggle-canister-set-Motocross-Oakley-2000-Crowbar/291837006667
I imagine they may advice against it for liability reason of your ruining your lens, but if you ask this seller if the RNR lenses are different in any way from the oem crowbar blue iridium lens you have aside from the 3 holes on each side. If they implicate the holes are the only difference then you should be fine in retrofitting the RNR to yours by copying the hole placement.
https://www.ebay.com/itm/RipNRoll-Blue-Roll-off-Goggle-canister-set-Motocross-Oakley-2000-Crowbar/291837006667