Do You Have The Right Tool For Your X-Metal?

[Joseaznag]

SCREWDRIVER, TORX, T6 25452 - SYSTL11107 By WIHA | eBay

This is ok for juliet and XX?

Sometimes they put t6x40mm or 60mm!!
Thats the key size?

Enviado do meu GT-S7580 através de Tapatalk

 

[Joseaznag]

SCREWDRIVER, TORX, T6 25452 - SYSTL11107 By WIHA | eBay

This is ok for juliet and XX?

Sometimes they put t6x40mm or 60mm!!
Thats the key size?

Enviado do meu GT-S7580 através de Tapatalk

This is not Wiha this is Torx .
I thinh it was wiha

Enviado do meu GT-S7580 através de Tapatalk

 

[mjt42]

This is not Wiha this is Torx .
I thinh it was wiha

Enviado do meu GT-S7580 através de Tapatalk

this is the one you need.
Wiha Precision T6 Torx Screwdriver T6 X 40mm Blade Tighten Loosen | eBay
the longer one you posted could possibly give too much torque.

 

[Joseaznag]

this is the one you need.
Wiha Precision T6 Torx Screwdriver T6 X 40mm Blade Tighten Loosen | eBay
the longer one you posted could possibly give too much torque.

Ok thanks

Enviado do meu GT-S7580 através de Tapatalk

 

[ShortChangeHero]

SCREWDRIVER, TORX, T6 25452 - SYSTL11107 By WIHA | eBay

This is ok for juliet and XX?

Sometimes they put t6x40mm or 60mm!!
Thats the key size?

Enviado do meu GT-S7580 através de Tapatalk

60mm is the length of the metal part of the tool. 40mm should be enough.

 

[Joseaznag]

60mm is the length of the metal part of the tool. 40mm should be enough.

Ok
Doubts off
Thanks

Enviado do meu GT-S7580 através de Tapatalk

 

[Joseaznag]

SCREWDRIVER, TORX T6 X 40 567 - SYSTL10968 By WIHA | eBay

I have to buy from Europe
This one is a precision like that one you show?

Enviado do meu GT-S7580 através de Tapatalk

 

[NoFair]

SCREWDRIVER, TORX T6 X 40 567 - SYSTL10968 By WIHA | eBay

I have to buy from Europe
This one is a precision like that one you show?

Enviado do meu GT-S7580 através de Tapatalk

That one is good.

 

[Joseaznag]

There is any important diference about pico finish or soft finish , should i choose one of this 2 ?

 

[NoFair]

There is any important diference about pico finish or soft finish , should i choose one of this 2 ?

Doesn't matter as long as it is a T6. The picofinish one in the link looks great for your needs. No need for softfinish on small drivers imho.